STANDARD MODELS

125 x 3   $1,995
250 x 3   $2,295
500 x 3   $2,895

125 x 4   $2,295
250 x 4   $2,695
500 x 4   $3,495

125 x 5   $2,595
250 x 5   $2,995
500 x 5   $3,895

125 x 7   $2,995
250 x 7   $3,595
500 x 7   $4,995
4 CH
125 x 2 / 250 x 2   $2,495
125 x 2 / 500 x 2   $2,795
250 x 2 / 500 x 2   $2,995
5 CH
250 x 3 / 125 x 2  $2,795
500 x 3 / 125 x 2   $3,395
500 x 3 / 250 x 2   $3,595
7 CH
250 x 3 / 125 x 4   $3,395
500 x 3 / 125 x 4   $3,995
500 x 3 / 250 x 4   $4,295
MANUFACTURING
MODIFICATIONS
CUSTOM DESIGN
PS AUDIO
HCA-2
GCA
GCC
GCP
GCHA
GCPH
TRIO C-100
TRIO P-200
DL3

PS POWER
P-300
P-500
P-600
P-1000

CALL FOR INFO
WYRED 4 SOUND
805-237-2113
2323 Tuley Rd. Unit A
Paso Robles, CA 93446
ICE CUBE MULTI-CHANNEL SERIES
From $1,995 to $4,995 each


Another product gets the Wyred 4 Sound
logo.  From the first look at this amplifier,
you will soon understand the true beauty held with-in.  We didn’t have the
need to add any enormous bells, or whistles to establish an elegant look.  
Robust, clean, simple, and dependable are a few words that will come to
mind.

The new Multi-channel is born with ultimate versatility.  With anywhere
from 1 to 7 channels, and power levels of 125, 250, and 500W (8 ohms),
this amplifier adapts to your stereo.  Because of the modular design, future
upgrades are done with ease should you not need all 7 channels at the
present time.  

Each channel is driven with independent direct coupled, balanced Dual FET
input buffer.  Components of the highest quality are being used from the
power supply caps to the critical resistors.  Wima audio-grade, Nichicon
MUSE caps, and Dale Rn55d copper leaded, non magnetic resistors are
what we use as a standard.  With the selection of the High Pass filter on
the Front right and left channels, you can easily bi-amp your speakers
without the use of any external crossover.  The 80Hz 12db per octave high
pass crossover offers the perfect amount of attenuation for your highs.  
Should you not want the crossover on, you can easily select it on or off
with the push of a button.  With balanced or unbalanced inputs, you can
easily select the input with another pushbutton on the rear.  

Dual 15A IEC’s internally connected with 10AWG wire gives you the option
to supply massive power to the amplifier and also allowing the use of
aftermarket power cables.  Up to 7 sets of Gold-plated binding posts are
connected with pure silver paralleled with 99.9% OFC copper delivers the
music which we have all come to love.

Stating that the Multi-channel amplifiers have little to low heat, unbeatable
imaging, unbelievably low noise, dynamic bass, super wide sound stage
and exceptionally low distortion are some words to define the
indescribable.  Not to mention that you have the option to have 500W x 7
channels, yes, that is 3,500 WATTS in 8 ohms.  Unlike the competitors, you
can actually get it with all channels driven thanks to the Dual IEC design.  
At these prices (about half that of the competition), you can’t afford to not
have one of these hooked up in your system!

SPECS / FEATURES (may slightly vary per model)
  • Powered by ICEpower ASP technologies
  • FULL OUTPUT THD+N < 0.01%
  • Power doubles in 4 ohms
  • 2 ohm stable
  • 83 % total efficiency @ FULL OUTPUT
  • CCIF Intermodulation distortion = 0.002%, 19kHz/20kHz
  • Damping factor = 2000, 100Hz, 8 ohm
  • Factory Selectable mains 115/230VAC
  • Stand-by power consumption 4.1W per channel
  • Thermal protection
  • Over current protection
  • DC output protection
  • Sound optimized soft clip
  • Stout construction
  • 12V DC Trigger in and out
  • Milled and Anodized Aluminum Front panel
  • Gold plated unbalanced (RCA) inputs
  • Neutrik Balanced (XLR) inputs
  • XLR ground lift pushbutton
  • High Pass ON/OFF pushbutton (Front right and left channels)
  • Compact size (17.25”W x 8”H x 16”D)
  • Covered by a 3 YEAR WARRANTY
CONTACT US
DEALERS